Dent Repair Using No Filler

	Use an Air grinder with a 24 grit disc and graze the area clean 30-60 seconds lightly with the weight of the tool only.
	With a DA sander and 80 grit go over the whole door, thus providing smooth metal to condition the steel with phosphoric acid. After acid prep take lacquer thinner and clean the whole panel down to remove any contaminants.
	Use Ditzlers DP 90 epoxy two part primer for maximum corrosion protection.The dents are now removed with no bondo and the primer is sprayed on over a smooth clean surface.

Page: 1 | 2 | 3 | 4